
Tables, chairs and armchairs for the home
Corten steel tables and seating
Corten steel tables and seating: Orphée, Dorian, Silas, Eurydice and Hestia.
How to choose a Corten table, chair or armchair
Corten and marble: Orphée and Dorian
Orphée is the dining table: a marble top, black veined with white or white veined with gray, on two broad Corten steel bases folded into angled loops and set well back for easy legroom. It runs from 2,000 x 1,000 mm (about 79 x 39 inches) to 2,800 x 1,200 mm (about 110 x 47 inches), stands 750 mm high (about 29.5 inches) and weighs roughly 225 to 350 kg (about 500 to 770 lb). Dorian brings marble to the living room as a square Corten coffee table, 800 to 1,200 mm a side (about 31.5 to 47 inches), its white-veined black top resting on a Corten steel case. The recessed base casts a shadow, so the whole piece seems to float.
Corten with wood and upholstery: Silas, Eurydice and Hestia
Silas swaps stone for wood: two thick timber beams side by side, joined at each end by an open Corten steel frame, from 1,400 x 600 mm (about 55 x 24 inches) to 1,800 x 800 mm (about 71 x 31.5 inches), and 350 mm high (about 14 inches) like Dorian. Eurydice, the Corten chair designed for Orphée, is a cantilever: one flat blade of steel rises from the floor into the back, with no rear legs, and its padded seat and back come in black or white. Hestia, the Corten armchair, cradles a thick ecru bouclé cushion on a low base with rounded corners, from 760 x 740 x 760 mm to 920 x 880 x 800 mm (about 30 x 29 x 30 to 36 x 35 x 31.5 inches).
Varnished in the workshop for indoor living
All five pieces are designed for indoor use. Each receives the Cortenys signature patina in the workshop, then a clear, colorless protective varnish applied by hand once the patina has matured: its rust, sienna and amber shades are fixed, and the varnish strongly reduces rust transfer to floors and contact surfaces, without ruling it out: we recommend felt pads under the feet and no direct contact with light or porous floors. As for upkeep, the varnished steel needs nothing more than a wipe with a damp sponge.
FAQ
Can Eurydice chairs be matched to the Orphée tabletop?
Yes. Eurydice was designed for Orphée, and both come in black or white: Orphée as black marble veined with white or white marble veined with gray, Eurydice as a padded seat and back. Choose the same tone for a unified table, or mix them for contrast. Only the stone and the upholstery change color; the Corten steel always keeps its signature patina.
Will every piece look exactly like the next?
Not quite. The signature patina is applied and checked one piece at a time in the workshop, and its earth, amber and deep rust shades vary slightly from one chair, loop or frame to the next. The varnish then holds each piece in the tone it left the workshop with. No two Silas tables, for instance, are ever exactly alike.
Is the wood on Silas varnished too?
No. In the workshop, the protective varnish goes on the Corten steel surfaces only, sealing the patina and bringing out its depth; it greatly reduces rust transfer without ruling it out, so felt pads under the feet remain wise. Silas's timber beams keep their own finish, as do the marble of Orphée and Dorian and the upholstery of Eurydice and Hestia. Our page on protective varnish for Corten steel explains the finish in detail.
Corten steel tables and seating / The models
Our selection of Corten steel tables and seating
We shape each creation by hand, with the care that your space deserves.

Tables, chairs and armchairs for the home
The spirit of the collection
Explore the collection, dimensions and finishes.
Corten steel garden ideas: 9 ways to shape a backyard or patioCortenys
Caring for your Corten steel tables and seating

01 / Advice
Match table and seats
In Corten tables and seats, the House takes care of the proportions and the meeting of materials. Check the heights, passages and intended use on the product pages. For interiors, the varnish limits runs and deposits without excluding stains; protect sensitive media. The Maison shapes your creation by hand, after your order, with the options offered by the model.



02 / Advice
A creation tailored to the space
We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

03 / Advice
Certified Corten from Italy, three weeks of hand patina
We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

04 / Advice
The varnish option, to support your use
Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

05 / Advice
Delivery of 5 to 12 weeks
We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

06 / Advice
The demands of the House, even in the service
We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.

07 / Cortenys
A dining room in Corten steel and marble
Orphée carries a marble top on two loops of Corten steel, surrounded by Eurydice chairs. Indoor pieces, delivered with our protective varnish; even varnished, Corten can still mark a light floor, so we recommend felt pads under the feet.

08 / Cortenys
Two coffee tables, two noble materials
Dorian crowns a Corten steel plinth with veined black marble; Silas sets two beams of solid wood on patinated frames.

09 / Cortenys
The softness of bouclé, the anchor of Corten
Hestia wraps a seat in ecru bouclé and sets it on a Corten steel base patinated in the workshop. Three sizes, made to order.

Corten steel tables and seating / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Cortenys signature patina
three weeks
We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilize it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Corten steel tables and seating: frequently asked questions
Can Corten steel furniture be used indoors?
Yes, on one condition: varnish. At Cortenys, every piece intended for indoor use receives the mandatory protective varnish, over the signature patina applied in the workshop.
What formats are available?
We present dimensions and options on each product sheet. We study any bespoke format before committing.
Can Corten stain the floor?
We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.
How to prepare for delivery?
We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.
Which finish to choose for Corten?
We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections




