
Columns, tiers, compartments, box and frame
Aluminum firewood racks
Powder-coated aluminum firewood racks: columns, two or three tiers, four to nine compartments, a frame on legs or a cabinet, in eight colors.
Aluminum firewood rack: match the shape to your wall, porch or patio
Start with the wall
An aluminum firewood rack is easiest to choose by the wall space it will fill. By a front door or on a narrow porch wall, the two- and three-tier columns stay 500 mm wide (about 20 inches), 600 mm (about 24 inches) in one three-tier size, and rise from 800 to 2,000 mm (about 31 inches to 6.6 feet). Along a patio wall, the two-tier rack stays low: 600 to 1,200 mm high and 600 to 1,500 mm long (about 2 to 4 feet high, 2 to 5 feet long). For a whole wall, the three-tier model runs 1,200 to 2,400 mm long (about 4 to 8 feet), and the square grids with four, six or nine compartments measure 800 to 2,200 mm a side (about 31 inches to 7 feet). All of them are 380 mm deep (about 15 inches), so width and height make the call.
Along a wall or out in the yard
Columns, tiered racks and the cabinet without legs rest their closed back against a wall. Two pieces can also stand free of any wall, on a patio or a lawn: the four-compartment rack and the frame on legs, 1,000 to 2,000 mm wide (about 3.3 to 6.6 feet). The frame is the only model offered in several depths: 350, 400 or 550 mm (about 14, 16 or 22 inches), depending on the size. The cabinet without legs, by contrast, sits right on the ground and takes logs loose. Whichever you choose, each design stays open at the front, a rack rather than a shed, and sits well under an awning or on a covered porch.
Aluminum or Corten steel: weight and color
Same design, very different weights: at 2,000 x 550 x 1,800 mm (about 79 x 22 x 71 inches), the frame on legs weighs 41.7 kg (about 92 lb) in 3 mm (about 0.12-inch) aluminum, roughly a third of the 121.3 kg (about 267 lb) of its twin in Corten steel of the same thickness. Each rack is powder coated in one of the eight colors on the configurator, from black RAL 9005 to orange, with no runoff to stain light-colored pavers. If you would rather have a living patina that keeps changing outdoors, our Corten steel firewood racks share the same designs.
FAQ
Does a tall aluminum firewood holder need anchoring?
A 2,000 mm (about 79-inch) column is designed to stand with its closed back against a wall, like the tiered racks and the cabinet. Whether it also needs anchoring depends on the wall, the ground and wind exposure, so have a professional assess the spot and approve the fastening. Cortenys ships the rack ready to install but does not offer on-site installation.
Can an aluminum firewood rack stand next to a Corten steel fire pit?
Yes, set well back from the flame. If the rack and the fire pit could touch at a point where rain collects, separate them with a gasket or spacer: aluminum and Corten steel in wet contact are prone to galvanic corrosion, as explained in our Corten steel guide.
Which rack separates kindling from larger logs?
The four-, six- and nine-compartment grids divide the reserve into separate sections, so kindling can stay apart from larger logs. The four-compartment grid can also stand on its own in the yard. For loose logs in a single space, choose the cabinet without legs, which has no shelves or dividers.
Aluminum firewood racks / The models
Our selection of Aluminum firewood racks
We shape each creation by hand, with the care that your space deserves.

Columns, tiers, compartments, box and frame
The spirit of the collection
Compare sizes.
View collectionCortenys
Caring for your Aluminum firewood racks

01 / Advice
Aluminum column firewood racks: firewood stored vertically
The column rises rather than spreads. The two-tier column firewood rack takes up 500 × 380 mm on the ground, in five heights from 800 to 1800 mm, and divides its supply into one to three compartments; at 1500 mm high, it weighs 14.6 kg.



02 / Advice
Tiered and compartment aluminum firewood racks
The two-tier firewood rack arranges the wood on two levels, in six sizes, from 600 × 380 × 600 mm to 1500 × 380 × 1200 mm; the 1000 × 380 × 1000 mm version weighs 17.2 kg. The three-tier model turns the supply into a composition for the façade, in five sizes from 1200 × 1200 to 2400 × 2000 mm.

03 / Advice
Box and frame on legs: the aluminum firewood rack pared back
The box without legs reduces the firewood rack to a single volume, with no shelf or divider, wide open at the front and resting against the wall on its solid back: ten sizes, from 500 to 2000 mm wide and from 500 to 2000 mm high, 385 mm deep; the 1000 × 1500 mm version weighs 12.7 kg. The frame on legs, in 3 mm aluminum, is as much a picture as a piece of furniture: the cut ends of the logs form a mosaic, and its legs lift it clear of the ground.

04 / Advice
Powder-coated aluminum: eight colors for a firewood rack
Each firewood rack receives the Cortenys finish, a dense RAL powder coating designed for outdoor use, at 30% gloss: a satin skin that catches the light without throwing it back too strongly. Eight colors make up the palette: white RAL 9016, which steps back and leaves the wood in the foreground; anthracite gray RAL 7016, in tune with contemporary window frames; black RAL 9005, the color shown, a line of ink around the logs; blue RAL 5001, yellow RAL 1005, green RAL 6018, red RAL 3020 and orange RAL 2004, to make the woodpile an accent of color on the terrace.

05 / Advice
Where to place an aluminum firewood rack
Close to where the wood will be burned: against a wall of the house, on the terrace, not far from a fire table or a fire pit, always at a safe distance from the flame. Choose stable, level ground able to bear the weight of the wood, and a well-ventilated spot, sheltered if possible from the prevailing rain: it is the air that dries the logs.

06 / Advice
Corten steel firewood racks
Columns, tiered models, compartment grids, box and frame on legs: each of these aluminum firewood racks has its counterpart in Corten steel, with the same design, in a living material in shades of earth and amber that answers the pale fibers of the wood. Discover our Corten steel firewood racks.

Aluminum firewood racks / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Finish and inspection
Included in the total lead time
We adapt the process to the material: the planned finish replaces the Corten patina. We check each creation by hand before packaging.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Aluminum firewood racks: frequently asked questions
Which aluminum firewood rack should you choose?
It all depends on the role you give it. Against a narrow wall, a column holds a good supply on 500 × 380 mm of ground.
Does an aluminum firewood rack rust?
No. Aluminum is by nature impervious to rust, and the Cortenys finish, a dense powder coating designed for outdoor use, dresses it to live outdoors, winter after winter.
Does wood dry in an aluminum firewood rack?
Yes, that is the role of the open front: air circulates between the logs and helps them dry, at their own pace. On the frame on legs, the legs also lift the stack clear of the ground.
How much wood can an aluminum firewood rack hold?
That depends on the model, its dimensions and the length of your logs. The external dimensions shown on each product page are not a capacity in cubic meters of stacked wood: compare the depth instead, from 350 to 550 mm depending on the model, with the length of your logs, then the available height.
Which colors are available for an aluminum firewood rack?
Eight RAL colors, all at 30% gloss: white 9016, anthracite gray 7016, black 9005, blue 5001, yellow 1005, green 6018, red 3020 and orange 2004. Black turns each compartment into a frame around the wood; the bold shades, from honey yellow to orange, enliven the façade long before the first fire.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections








