
Outdoor fireplaces, wall-mounted and vertical fires
Corten steel outdoor fireplaces
Corten steel outdoor fireplaces: Prométhée and Atlas for wood fires, the wall-mounted Ignis and the vertical Pharos for bioethanol.
How to choose a Corten outdoor fireplace for your patio
Prométhée and Atlas: two ways to burn wood
Two models bring the crackle and glow of a real wood fire to a patio or backyard. The Prométhée outdoor fireplace is a slender pyramid whose tapering shape draws the flame upward and sends smoke away from the seating, with room in its base for the evening's firewood. It is 350 to 400 mm square (about 14 to 16 inches) and 1,150 to 1,400 mm tall (about 45 to 55 inches), at 35 to 48.7 kg (about 77 to 107 lb). Atlas is a single upright cylinder, 400 to 500 mm in diameter (about 16 to 20 inches) and 1,300 to 1,800 mm tall (about 51 to 71 inches), weighing roughly 49 to 85 kg (about 108 to 187 lb): the fire sits halfway up the column, a lower opening holds the logs, and with no back side, it looks finished from every angle.
Ignis and Pharos: bioethanol on the wall or in a frame
For a steady, smoke-free flame that leaves no ash, Ignis and Pharos run on bioethanol. The Ignis wall-mounted fireplace is a long, shallow trough, open at the top, that mounts on a wall: 900 to 1,500 mm long (about 35 to 59 inches) and roughly 24 to 45 kg (about 53 to 99 lb), it uses no floor space and puts the flame at seat height. Cortenys does not provide on-site installation, so have the wall and the mounting approved by a qualified professional. The Pharos vertical fireplace stands on a flat base, two uprights and a crossbar framing the view, with the flame sheltered behind transparent panels in its lower third; it is 1,200 to 1,800 mm tall (about 47 to 71 inches) and roughly 50 to 95 kg (about 110 to 209 lb).
Setting up a Corten steel fireplace
Place Prométhée, Atlas or Pharos on firm, non-combustible ground such as stone, concrete, pavers or compacted gravel, and follow the clearances and instructions given for your model. Look into local rules too, as some towns and counties restrict outdoor fires, especially in dry weather. With wood, note the prevailing wind so smoke drifts away from your home and your neighbors, and keep a supply of seasoned logs close at hand, in a firewood rack or another dry, airy spot.
FAQ
Can a Corten steel fireplace be used indoors?
No. Prométhée, Atlas, Ignis and Pharos are outdoor pieces: none is designed for use inside a home, in an enclosed space or under a low awning, and none is intended as cladding for an indoor fireplace. Set them out in the open, on a patio, a terrace or in the backyard.
Can a Corten fireplace sit on a wood deck?
Not with a wood fire: Prométhée and Atlas belong on stone, concrete, pavers or compacted gravel. If the fireplace must go on a deck, pick a bioethanol model such as Pharos, place it over a wide fire-resistant plate reaching well beyond its base, and keep to the clearances and instructions for the model.
Will the fire damage the steel?
No. Corten steel stands up to the heat of a wood or bioethanol flame, which is why it is so often chosen for outdoor fireplaces. Near the hearth, the patina may darken or shift in tone over the evenings, a mark of use that does not affect the piece. After a fire, keep children and pets away until the steel has cooled.
Corten steel outdoor fireplaces / The models
Our selection of Corten steel outdoor fireplaces
We shape each creation by hand, with the care that your space deserves.

Outdoor fireplaces, wall-mounted and vertical fires
The spirit of the collection
Compare the forms.
Corten steel fire pit or fire table: which to choose?Cortenys
Caring for your Corten steel outdoor fireplaces

01 / Advice
A clear space
The Corten steel exterior fireplace is chosen for its silhouette as much as for the presence of the fire. An exterior fireplace in Corten steel combines the verticality of the design with a warm texture, designed to compose the space from a distance as well as up close. Provide a suitable support and the clearances in the instructions. Evaluate the elements close to the fireplace and access for its maintenance before choosing the model. The Maison shapes your creation by hand, after your order, with the options offered by the model.



02 / Advice
A creation tailored to the space
We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

03 / Advice
Certified Corten from Italy, three weeks of hand patina
We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

04 / Advice
The varnish option, to support your use
Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

05 / Advice
Delivery of 5 to 12 weeks
We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

06 / Advice
The demands of the House, even in the service
We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.
07 / Cortenys
A column that comes alight at nightfall
Atlas, a cylindrical Corten steel outdoor fireplace, opens its hearth at mid-height and keeps its logs in a low niche. Three heights, up to 1800 mm.
08 / Cortenys
Fire hung on the wall
Ignis is fixed to the wall and runs a line of bioethanol flame along its full length: the terrace stays clear, and the wall becomes the setting.
09 / Cortenys
A flame at eye level
The Prométhée fireplace soars as a pyramid: natural draft, open hearth and a firewood rack at its base, beneath the Cortenys signature patina.
Corten steel outdoor fireplaces / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Cortenys signature patina
three weeks
We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilize it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Corten steel outdoor fireplaces: frequently asked questions
Why choose a Corten steel outdoor fireplace?
Because it gives fire a vertical line: the flame can be seen from across the terrace, and the fireplace structures the space at every hour. Corten steel needs no paint; its patina protects the metal and echoes the color of the embers.
What formats are available?
We present dimensions and options on each product sheet. We study any bespoke format before committing.
Can Corten stain the floor?
We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.
How to prepare for delivery?
We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.
Which finish to choose for Corten?
We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections



