Search for a product

All products
Cortenys
Two Vesper lanterns in Corten steel flanking the entrance of a stone house, wide view at dusk

Luxury Corten steel lighting

Corten steel lights and lanterns

Corten steel lights: flame lanterns Aurore, Flora, Stella and Vesper, the Luminus LED bollard, façade and indoor wall lights, a floor lamp and pendants.

Vesper

Choosing Corten garden lights: flame lanterns or electric fixtures

Flame lanterns for the patio and backyard

Aurore, Flora, Stella and Vesper are not electric fixtures: each Corten lantern holds a candle or a decorative fire, its flame filtered through the laser-cut pattern. Flora and Stella are cubes of 400 x 450 mm (about 16 x 18 inches) weighing 27 kg (about 60 lb) each, sized for table height next to patio seating. Aurore and the Vesper lantern are columns of 400 x 1,000 mm (about 16 x 39 inches) at 46.5 kg (about 103 lb) each, to line a walkway or frame a patio. Aurore and Flora have round patterns, Stella and Vesper straight ones; all four are outdoor pieces with the Cortenys signature patina and no varnish option, so set them on gravel, lawn or dark pavers.

Electric light for walkways and walls

For electric light outdoors, Luminus, our Corten bollard light, pairs an integrated warm LED with a 2 mm (about 0.08-inch) Corten steel post, 450 to 750 mm (about 18 to 30 inches) tall, its light aimed down at the ground. Three Corten wall lights serve exterior walls: Solan, a slender upright bar 600 to 1,200 mm (about 24 to 47 inches) high that washes the wall on both sides from a concealed source; Nérite, two folded panels split by an oblique slit, for exterior walls and entry halls; and Angle Dièdre, designed for the corner of a building and lighting both walls at once. All four offer the protective varnish as an option; it greatly reduces rust run-off down the wall and onto the paving below, without ruling it out, so protect light paving beneath them.

Indoor Corten lighting, varnish included

Eos, Aura, Sirius, Lyra and Astra are designed for interiors, and each leaves the workshop with the protective varnish that Cortenys requires on every piece installed indoors: it seals the patina and strongly reduces rust transfer to floors and walls, without ruling it out: we recommend felt pads or a tray under the base of the Sirius floor lamp, no direct contact with light or porous floors, no very light or porous wall behind the wall lights, and protecting the floor or table below the wall and pendant lights. Eos traces a line of light through a vertical slit, while Aura hides its source in a square frame of 300 to 500 mm (about 12 to 20 inches). The Sirius floor lamp, 1,200 to 1,800 mm (about 4 to 6 feet) tall, stands on its own next to a sofa or in a living room corner. Over a kitchen island or a long table, the Lyra pendant spans 1,200 to 1,800 mm (about 4 to 6 feet), and the faceted Astra hangs alone, in pairs or in a cluster.

FAQ

Do Corten lanterns need electricity?

No. Aurore, Flora, Stella and Vesper are flame lanterns: each holds a candle or a decorative fire, with no wiring involved. They are outdoor pieces, never meant for use inside a home. For electric light in the yard, the Luminus bollard carries a warm LED.

Which Corten steel lights work indoors?

The Eos and Aura wall lights, the Sirius floor lamp and the Lyra and Astra pendants are designed for interiors and come varnished. Nérite, designed for exterior walls and entry halls, should be ordered with the optional protective varnish for a hall, since varnish is mandatory indoors; it greatly reduces rust transfer to the wall without ruling it out. Even varnished, Corten can still mark a light or porous floor, so we recommend protecting the floor beneath the Sirius floor lamp. Flame lanterns stay outside.

Who installs a Corten wall light or bollard?

Our pieces arrive ready to install; Cortenys does not provide on-site installation. For a wall light, a pendant or the Luminus bollard, a licensed electrician should make the electrical connection and check the mounting to the wall, ceiling or ground, using the weight listed on the model's product page.

Corten steel lights and lanterns / The models

Our selection of Corten steel lights and lanterns

We shape each creation by hand, with the care that your space deserves.

Cortenys

Caring for your Corten steel lights and lanterns

Sirius floor lamp in Corten steel, lit, in a dark living room near a sofa and a coffee table

01 / Advice

Light up the right place

The cutting of the metal and the position of the light source give the Corten luminaire its expression. When turned off, the light reveals its texture; lit, it creates a warm atmosphere. Indoor or outdoor use is verified for each model. Identify circulation areas, walls and connection points. Check each sheet for equipment, installation and authorized indoor or outdoor use. No stock of finished creations: each creation is shaped by hand after its owner's order.

High-angle view into the Aurore lantern in Corten steel, flame amid the openwork pattern
Angle Dièdre wall light in Corten steel in a low-angle view, above a couple in evening dress
Two Vesper lanterns in Corten steel lit at night in a courtyard, a figure in a lit doorway

02 / Advice

A creation tailored to the space

We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

Luminus bollard light in Corten steel lit, low-angle view in a palm garden at blue hour

03 / Advice

Certified Corten from Italy, three weeks of hand patina

We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

Four Solan wall lights in Corten steel on a pale wall above lavender, a woman standing in the center

04 / Advice

The varnish option, to support your use

Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

Two Eos wall lights in Corten steel lit, front view on a dark textured wall

05 / Advice

Delivery of 5 to 12 weeks

We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

Aura square wall light in Corten steel, lit, front view on a pale wall

06 / Advice

The demands of the House, even in the service

We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.

Angle Dièdre wall light in Corten steel glowing, front view on a rendered wall corner

07 / Cortenys

The corner of the wall, traced in light

Dièdre folds its two Corten steel wings over the edge of the building and spreads a warm glow on either side.

Solan wall lights in Corten steel lit along a pale wall, a woman in a doorway overlooking the countryside

08 / Cortenys

Bars of light on the façade

Solan raises a vertical bar of Corten steel that lights the wall from both its sides, in three heights from 60 to 120 cm.

09 / Cortenys

Light that guides each step

A bollard light in 2 mm Corten steel, Luminus casts a warm LED glow low along the borders and paths.

10 / Cortenys

Lanterns where the flame dances

Vesper rises as a tall openwork column, Stella sits at table height: the cutwork of the Corten steel turns the flame into a lace of light.

Lyra pendant light in Corten steel above a long table in a brick-walled loft overlooking towers at dusk

Made to order

The time each piece deserves.

We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.

Illustrative timeline

5 to 12 weeks

  1. Preparation

    Included in the total lead time

    We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.

  2. Making

    Included in the total lead time

    We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.

  3. Cortenys signature patina

    three weeks

    We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilize it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.

  4. Delivery

    Included in the total lead time

    We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.

We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.

Cortenys

Corten steel lights and lanterns: frequently asked questions

What formats are available?

We present dimensions and options on each product sheet. We study any bespoke format before committing.

Can Corten stain the floor?

We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.

How to prepare for delivery?

We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.

Which finish to choose for Corten?

We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.

A particular project in mind?

We study your space, its dimensions and its finish. We select projects to which we can give our full attention.

Delivery to the United States

Our retail prices in US dollars include delivery to the United States. US customs duties and import taxes are not included and are payable on delivery. Each piece is made to order and reaches you within 5 to 12 weeks.