Search for a product

All products
Cortenys
Close-up of three Clio slim round planters in Corten steel, rust patina in the foreground

Tapered, flared and cylindrical pots

Corten steel pots

Corten steel plant pots, from the round cylindrical Callisto and slim Clio to the tapered Calypso and flared Daphné.

Clio

Choosing a Corten steel pot

Four silhouettes, one plant to show off

Maison Cortenys designs four pot shapes, all in 2 mm Corten steel, each suited to a different kind of plant. Callisto, a round, cylindrical pot with no edge or angle, is a natural home for an olive tree; with 23 sizes, from 350 to 1,400 mm across (about 14 to 55 inches) and up to 1,000 mm tall, it answers anyone looking for large round Corten steel planters. Clio, a slender round pot shaped as a rimless cone, suits ornamental grasses. Calypso has the tapered shape of a traditional flowerpot, and Daphné, square and flared, raises the planting for an entrance.

Matching the pot to the plant

Choose the volume for the plant's mature root system, not its size on the day you buy it. Callisto, for instance, is delivered empty, ready for your own potting mix. At the bottom, a drainage layer of clay pebbles or gravel under a geotextile fabric keeps wet soil from staying packed against the steel; in full sun, a thick geotextile helps keep roots cool. Check the weight of your chosen size on its product page, and leave room around your Corten steel plant pots for watering, repotting and cleaning.

Patina, patios and rooftops

Every pot arrives already dressed in the Cortenys signature patina, applied in our workshop; its tones then deepen with exposure. On light-colored pavers or a pool deck, water from rain or irrigation can leave marks: a bed of gravel or a dark slab protects the ground; the protective varnish, optional on selected models, greatly reduces them without ruling them out. Right on the coast, where salt spray keeps the patina from stabilizing, we would point you to our powder-coated aluminum planters instead.

FAQ

Round, tapered or flared: which pot should I choose?

The cylindrical Callisto suits upright plants such as an olive tree; Clio's cone shows off trailing grasses; Calypso and Daphné, more flared, give height to an entrance or a front porch.

What goes at the bottom of a Corten steel pot?

A drainage layer of clay pebbles or gravel under a geotextile fabric, so wet soil does not sit against the wall and the roots can breathe.

Can a Corten pot go on a roof deck?

Yes, our garden scenes show Callisto and Clio on rooftops. Check the weight of the planted pot, the load your roof can take and access for watering, and protect light-colored surfaces.

Callisto round planters in Corten steel with uplit olive trees, on a roof terrace at sunset

Tapered, flared and cylindrical pots

The spirit of the collection

Compare silhouettes and sizes.

How to choose a Corten steel planter

Cortenys

Caring for your Corten steel pots

Daphné flared square planters in Corten steel with white flowers, lined up toward an arcaded gallery

01 / Advice

One plant, one volume

We follow with Callisto a curve that the light does not leave. With Calypso we open the pot to the sky and take care of its wide rim. We shape these profiles by hand, after your order, in authentic, certified Corten steel from Italy. We look for the volume that accompanies the plant, alone or in composition. We invite you to check the drainage, the place of the adult roots and the access for watering, repotting and cleaning around the pot.

Three Clio slim round planters in Corten steel around a man reading on a bench, in a bright interior
Calypso conical planters in Corten steel with white hydrangeas, a woman placing a tray on a low table
Row of Daphné flared square planters in Corten steel, a woman tending the white flowers of the first one

02 / Advice

A creation tailored to the space

We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

Callisto round planters in Corten steel with olive trees around a couple raising a toast on a roof terrace

03 / Advice

Certified Corten from Italy, three weeks of hand patina

We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

Calypso conical planters in Corten steel with white hydrangeas framing a garden seating area among olive trees

04 / Advice

The varnish option, to support your use

Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

Clio slim round planters in Corten steel in front of a man seated on a bench, close framing

05 / Advice

Delivery of 5 to 12 weeks

We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

Daphné flared square planter in Corten steel with white flowers, a woman standing behind, snowy mountains beyond

06 / Advice

The demands of the House, even in the service

We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.

Callisto round planters in Corten steel with olive trees framing a couple in evening dress, bell tower beyond

07 / Cortenys

On the rooftops, the cylinder and the cone

Callisto, a round Corten steel pot, holds an olive tree; Clio, a taut cone without a rim, lets grasses spill over its edge.

08 / Cortenys

Two silhouettes for an entrance

Calypso takes up the tapered profile of the timeless flower pot; Daphné, a flared square pot, carries the planting up high. Both in 2 mm Corten steel.

Callisto round planter in Corten steel with an uplit olive tree, seen between curtains opening onto a roof terrace

Made to order

The time each piece deserves.

We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.

Illustrative timeline

5 to 12 weeks

  1. Preparation

    Included in the total lead time

    We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.

  2. Making

    Included in the total lead time

    We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.

  3. Cortenys signature patina

    three weeks

    We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilize it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.

  4. Delivery

    Included in the total lead time

    We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.

We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.

Cortenys

Corten steel pots: frequently asked questions

What is the difference between a pot and a Corten steel planter?

A pot is a vertical volume, often round or flared, set alone, in pairs or in groups: it showcases a single plant. A planter, longer, edges a terrace, accompanies a hedge or separates two spaces.

What formats are available?

We present dimensions and options on each product sheet. We study any bespoke format before committing.

Can Corten stain the floor?

We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.

How to prepare for delivery?

We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.

Which finish to choose for Corten?

We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.

A particular project in mind?

We study your space, its dimensions and its finish. We select projects to which we can give our full attention.

Delivery to the United States

Our retail prices in US dollars include delivery to the United States. US customs duties and import taxes are not included and are payable on delivery. Each piece is made to order and reaches you within 5 to 12 weeks.