Search for a product

All products
Cortenys
Célestin water wall in Corten steel, front view on a beige stone wall, water sheet into a basin

Water blades and wall fountains

Corten steel water walls

Corten steel water walls for gardens and terraces.

Célestin Corten Water Wall

Choosing a Corten steel water wall

A curtain of water on a wall or a panel

A Corten steel water wall turns a flat surface into a moving one. Célestin is a wall-mounted water blade, fixed high on an existing wall: a smooth curtain of water escapes from edge to edge and falls below. It comes in widths from 1,000 to 3,000 mm (about 3 to 10 feet). Léandre, in 2 mm Corten steel, is a vertical panel down which a wide sheet of water pours; it comes in widths from 1,000 to 3,000 mm and heights from 1,200 to 1,600 mm. Both come with a submersible pump and LED lighting built into the water blade, so the curtain glows at dusk. For water that bubbles or cascades, see our fountains and water features.

Where the water lands

Both water walls are supplied without a catch basin: you decide where the water comes to rest. It can be a pond, a reflecting pool, or one of our water basins, such as Narcisse, a rectangular basin designed to receive our water blades. Before ordering, check that the wall can carry the piece, plan an outdoor power supply for the pump and LEDs, and keep access for maintenance. Pieces arrive ready to install; we do not provide on-site installation.

Patina and care

Each water wall arrives already dressed in the Cortenys signature patina, applied in our workshop; under the veil of water, the tones grow deeper. The optional protective varnish fixes the patina and simplifies care; it greatly reduces runoff but does not rule it out. Keep the water clean and renewed, never stagnant, and protect light-colored pavers and coping from runoff.

FAQ

Is a basin included with Célestin or Léandre?

No. Both are supplied without a catch basin: the water can fall into a pond or a reflecting pool, or into a Cortenys water basin.

Can a Corten water wall pour into my swimming pool?

Not with Corten steel: chlorinated or salt water keeps the patina from stabilizing. For a swimming pool, choose Léandre or Célestin in powder-coated aluminum.

Célestin or Léandre?

Célestin is fixed high on a wall you already have; Léandre brings its own vertical panel, down which the water runs.

Léandre water wall in Corten steel, three-quarter view, water sheet reflected in the basin, trees and blue sky

Water blades and wall fountains

The spirit of the collection

Discover Léandre and Célestin and check the installation requirements of each design.

Installing a Corten steel fountain or water feature

Cortenys

Caring for your Corten steel water walls

Célestin water wall in Corten steel on a beige façade, wide view with sun loungers in the foreground

01 / Advice

Think about the entire composition

The blade of a Corten steel water wall gives relief to a courtyard, patio or garden background. The House accords the flow, proportions and warmth of the patina to compose an architectural presence. Check the equipment provided, the required pool and the connections on the product page. Maintain access to technical elements for maintenance. Each creation is made by hand, to order, for the person who chose it.

Narcisse rectangular water basin in Corten steel on a paved terrace facing the sea at sunset
Léandre water wall in Corten steel between tall ornamental grasses, water sheet falling into a basin
Narcisse rectangular water basin in Corten steel, front view on a lawn, in front of a row of trees

02 / Advice

A creation tailored to the space

We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

Léandre water wall in Corten steel in close framing, water sheet falling into the basin between two hedges

03 / Advice

Certified Corten from Italy, three weeks of hand patina

We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

Narcisse rectangular water basin in Corten steel from a low angle on a lawn, under a blue sky

04 / Advice

The varnish option, to support your use

Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

Narcisse rectangular water basin in Corten steel, front view on a timber deck, wooded mountains beyond

05 / Advice

Delivery of 5 to 12 weeks

We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

Narcisse rectangular water basin in Corten steel seen from above along a stone balustrade, mountains beyond

06 / Advice

The demands of the House, even in the service

We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.

07 / Cortenys

A blade of water drawn across Corten steel

Léandre sends a smooth curtain of water down its vertical panel; pump and LED lighting are included, and the basin is yours to choose.

Made to order

The time each piece deserves.

We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.

Illustrative timeline

5 to 12 weeks

  1. Preparation

    Included in the total lead time

    We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.

  2. Making

    Included in the total lead time

    We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.

  3. Cortenys signature patina

    three weeks

    We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilize it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.

  4. Delivery

    Included in the total lead time

    We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.

We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.

Cortenys

Corten steel water walls: frequently asked questions

What is a Corten steel water wall?

It is a vertical fountain: a blade of water pours in a smooth curtain down a panel or from a wall, then falls into a basin. In Corten steel, the piece carries a warm patina that answers the reflections of the water.

What formats are available?

We present dimensions and options on each product sheet. We study any bespoke format before committing.

Can Corten stain the floor?

We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.

How to prepare for delivery?

We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.

Which finish to choose for Corten?

We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.

A particular project in mind?

We study your space, its dimensions and its finish. We select projects to which we can give our full attention.

Delivery to the United States

Our retail prices in US dollars include delivery to the United States. US customs duties and import taxes are not included and are payable on delivery. Each piece is made to order and reaches you within 5 to 12 weeks.