Search for a product

All products
Cortenys
Hélios fire table in Corten steel lit on a terrace facing the sea at sunset

Round, square and elongated fire tables

Corten steel fire tables

Corten steel fire tables in round, square and elongated shapes.

Hélios

How to choose a Corten fire table for your patio

Round or square, with the fire in the center

Hélios and Héphaïstos follow the classic fire pit table layout: a wood-burning hearth in the center, a low top all around it. Both are built from 3 mm (about 0.12-inch) Corten steel, the thickness our Corten steel guide gives for pieces exposed to heat, and both stand 280 mm (about 11 inches) high, keeping the flames in view from a lounge chair. Hélios, the round model, comes in 1,000 or 1,250 mm diameters (about 39 or 49 inches). Héphaïstos is offered as a square from 900 to 1,600 mm per side (about 35 to 63 inches) or as a 1,500 x 800 mm rectangle (about 59 x 31 inches), a natural match for a sectional.

Long and low: Etna, Taranis and Pyrros

For a long sofa or a large gathering, the three linear tables run 1,500 to 2,600 mm long (about 5 to 8.5 feet) and 350 to 450 mm high (about 14 to 18 inches). Etna, wider at the top than at its base, carries a straight wood-burning hearth across most of its top. Taranis, also wood-burning, sets its round hearth toward one end, leaving most of the surface for glasses and plates. Pyrros is the collection's only bioethanol fire table: a long central slot in its thick top holds a low, steady flame.

Setting it up on the patio

Any Corten fire table needs a stable, non-combustible base, such as stone, concrete, pavers or compacted gravel, plus the clearances given for the model. Each one arrives in the Cortenys signature patina, applied and inspected in our workshop and left unvarnished, like all our fire pieces; the color keeps deepening outdoors, and heat may darken it near the hearth. Like any dark metal, Corten steel also gets hot in full sun. Unlike a fire pit, a fire table frames the flame with a usable top: our guide to choosing a fire pit or a fire table compares the two, along with wood and bioethanol.

FAQ

How tall is a Corten fire table?

Hélios and Héphaïstos stand 280 mm (about 11 inches) high, a deliberately low height for lounge seating. Etna, Taranis and Pyrros range from 350 to 450 mm (about 14 to 18 inches), depending on length. Once lit, the hearth and its rim get hot, so keep kids and pets back until the table has cooled.

Which fire table fits a small patio?

The most compact options are Héphaïstos at 900 x 900 mm (about 35 x 35 inches) and Hélios at 1,000 mm (about 39 inches) across. For a narrow space, Taranis is just 500 mm (about 20 inches) wide in its 1,800 mm (about 6-foot) length, and Etna starts at 1,600 x 600 mm (about 63 x 24 inches). Leave a comfortable walkway all around.

How much does a Corten steel fire table weigh?

Published weights range from 44 kg (about 97 lb) for the 1,000 mm (about 39-inch) Hélios to around 160 kg (about 353 lb) for the 2,200 mm (about 87-inch) Pyrros. Héphaïstos weighs 60 kg (about 132 lb) at 1,000 x 1,000 mm (about 39 x 39 inches), and the longest Etna and Taranis come in at around 155 and 145 kg (about 342 and 320 lb).

A couple raising a toast behind the lit Hélios fire table in Corten steel, by the sea at sunset

Round, square and elongated fire tables

The spirit of the collection

Compare the designs and check the fuel specified for each model.

Corten steel fire pit or fire table: which to choose?

Cortenys

Caring for your Corten steel fire tables

Hélios fire table in Corten steel with tall flames by the sea at dusk, close view of the patina

01 / Advice

Plan for traffic

The balance between the hearth and the top gives the Corten fire table its furniture character. The House works on the presence of volume as much as the patina, with use in accordance with the instructions for each home. Keep passages and seats out of heat zones indicated in the instructions. The fuel and authorized uses are verified model by model. No stock of finished creations: each creation is shaped by hand after its owner's order.

A woman seated behind the Hélios fire table in Corten steel on a snowy mountain terrace
Héphaïstos fire table in Corten steel lit by a basin at the foot of wide steps, mountains behind
Pyrros fire table in Corten steel lit on a snowy mountain terrace at dusk, three-quarter view

02 / Advice

A creation tailored to the space

We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

Close-up of the flames and top of the Etna fire table in Corten steel at dusk on a terrace

03 / Advice

Certified Corten from Italy, three weeks of hand patina

We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

Taranis fire table in Corten steel lit on a large paved terrace, high three-quarter view

04 / Advice

The varnish option, to support your use

Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

A woman in a bathrobe warms her hands over the Héphaïstos fire table in Corten steel at night

05 / Advice

Delivery of 5 to 12 weeks

We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

Close-up of the line of flames and patinated top of the Pyrros fire table in Corten steel

06 / Advice

The demands of the House, even in the service

We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.

07 / Cortenys

Fire at the heart of the outdoor lounge

Around Hélios, a round fire table in 3 mm Corten steel, the seats fall naturally into place: no corners, no head of the table, everyone faces the flame.

08 / Cortenys

By the water, two ways of drawing fire

Taranis sets a round hearth at the end of a long top and leaves the rest to the table; Pyrros draws a line of bioethanol flame down the middle of a Corten steel slab.

09 / Cortenys

A line of embers facing the landscape

With its sloping sides, the Etna fire table stretches a long wood-burning hearth along almost its entire length, in three lengths made to order.

10 / Cortenys

The square, for generous gatherings

Héphaïstos, a crisp-edged monolith of Corten steel, sets its hearth at the heart of the block. Seven formats, from a 900 mm square to the rectangular version.

Etna fire table in Corten steel lit at dusk on the terrace of a contemporary house, three-quarter view

Made to order

The time each piece deserves.

We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.

Illustrative timeline

5 to 12 weeks

  1. Preparation

    Included in the total lead time

    We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.

  2. Making

    Included in the total lead time

    We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.

  3. Cortenys signature patina

    three weeks

    We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilize it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.

  4. Delivery

    Included in the total lead time

    We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.

We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.

Cortenys

Corten steel fire tables: frequently asked questions

What is a Corten steel fire table?

It is a hearth set into a tabletop, sometimes called a fire pit table: you sit around it as you would around a table, and enjoy the flame from your chair. Where a fire pit is there to be gazed at, a fire table is there to be shared.

What formats are available?

We present dimensions and options on each product sheet. We study any bespoke format before committing.

Can Corten stain the floor?

We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.

How to prepare for delivery?

We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.

Which finish to choose for Corten?

We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.

A particular project in mind?

We study your space, its dimensions and its finish. We select projects to which we can give our full attention.

Delivery to the United States

Our retail prices in US dollars include delivery to the United States. US customs duties and import taxes are not included and are payable on delivery. Each piece is made to order and reaches you within 5 to 12 weeks.