
Tapered, flared and cylindrical pots
Corten steel pots
Corten steel plant pots, from the round cylindrical Callisto and slim Clio to the tapered Calypso and flared Daphné.
Corten steel pots for terraces, steps and entrances
Cylinder, cone, flowerpot or flared square
Callisto, the cylinder, has the widest range of sizes, from 350 to 1400 mm across and 400 to 1000 mm high, and at its largest it holds a terrace on its own. Clio is a slim cone that widens from its base to an opening of 500 to 1000 mm, 400 to 1000 mm tall, made to stand alone at the centre of a terrace or to be repeated at an entrance. Calypso revisits the flowerpot everyone recognises, with a wide opening and a marked rim, 600 to 1000 mm across and 400 to 1000 mm high. Daphné, a flared square with an opening of 500 or 600 mm, rises to 1200 mm, the tallest of the four. All four are made of 2 mm Corten steel.
Drainage, roots and the light at dusk
A drainage bed of gravel or clay pebbles in the base of a Corten plant pot keeps water from standing around the roots, and discreet spacers beneath the base let air pass so that the steel can dry. Size the pot for the plant it will become rather than for the one you bring home. The patina is in place from the start, applied in our workshop, and it changes with the light: late in the day it glows on the cone of Clio, and at dusk Callisto turns into a warm, dark mass.
Raw or varnished, Corten or aluminium
Left raw, the patina keeps deepening outdoors. For pale stone or light paving, the protective varnish, available on all four pots and applied in our workshop, holds the colour and strongly reduces rust marks around the base, without ruling them out. If you prefer a colour that stays as it is, Callisto, Clio and Daphné also exist in powder-coated aluminium, with eight colours to choose from, while Calypso stays a Corten-only design.
FAQ
What does an empty Corten steel pot weigh?
From 12.6 kg for a Callisto 350 mm across and 600 mm high to 96.7 kg for the largest Callisto, 1400 mm across and 1000 mm high. Clio weighs 13.6 to 52.6 kg, Calypso 16.7 to 55.0 kg and Daphné 20.2 to 39.7 kg. Once planted and watered, the soil outweighs the steel, so settle the final position first.
How can Corten flower pots be grouped?
Repetition gives them presence. Three Callisto of different heights make a warm group beside a door, four in a row line a low wall, a pair of Daphné frames a passage, Clio repeated marks an entrance and a row of Calypso can climb a flight of steps. Keep to one silhouette per group rather than mixing all four, and let the patina tie the whole together.
Can a Corten pot take a tree?
Yes, if the volume suits the tree at maturity. The largest Callisto, 1400 mm across and 1000 mm high, has room for a small tree such as an olive, or for a large shrub, and all four pots are made of 2 mm steel, the sheet our planter guide recommends for trees. Keep a drainage bed in the base, and allow for the planted weight when choosing its spot.
Corten steel pots / The models
Our selection of Corten steel pots
We shape each creation by hand, with the care that your space deserves.

Tapered, flared and cylindrical pots
The spirit of the collection
Compare silhouettes and sizes.
How to choose a Corten steel planterCortenys
Caring for your Corten steel pots

01 / Advice
One plant, one volume
We follow with Callisto a curve that the light does not leave. With Calypso we open the pot to the sky and take care of its wide rim. We shape these profiles by hand, after your order, in authentic, certified Corten steel from Italy. We look for the volume that accompanies the plant, alone or in composition. We invite you to check the drainage, the place of the adult roots and the access for watering, repotting and cleaning around the pot.



02 / Advice
A creation tailored to the space
We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

03 / Advice
Certified Corten from Italy, three weeks of hand patina
We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

04 / Advice
The varnish option, to support your use
Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

05 / Advice
Delivery of 5 to 12 weeks
We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

06 / Advice
The demands of the House, even in the service
We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.

07 / Cortenys
On the rooftops, the cylinder and the cone
Callisto, a round Corten steel pot, holds an olive tree; Clio, a taut cone without a rim, lets grasses spill over its edge.
08 / Cortenys
Two silhouettes for an entrance
Calypso takes up the tapered profile of the timeless flower pot; Daphné, a flared square pot, carries the planting up high. Both in 2 mm Corten steel.

Corten steel pots / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Cortenys signature patina
three weeks
We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilise it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Corten steel pots: frequently asked questions
What is the difference between a pot and a Corten steel planter?
A pot is a vertical volume, often round or flared, set alone, in pairs or in groups: it showcases a single plant. A planter, longer, edges a terrace, accompanies a hedge or separates two spaces.
What formats are available?
We present dimensions and options on each product sheet. We study any bespoke format before committing.
Can Corten stain the floor?
We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.
How to prepare for delivery?
We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.
Which finish to choose for Corten?
We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections



