
Outdoor fireplaces, wall-mounted and vertical fires
Corten steel outdoor fireplaces
Corten steel outdoor fireplaces: Prométhée and Atlas for wood fires, the wall-mounted Ignis and the vertical Pharos for bioethanol.
A Corten outdoor fireplace that gives the terrace a focal point
Prométhée and Atlas, two wood fires at eye level
An outdoor fireplace lifts the flame to eye level, where it can be seen from across a courtyard or from the far end of a long terrace. In the Prométhée outdoor fireplace, 1150 or 1400 mm tall on a 350 or 400 mm square base, the tapering pyramid works like a flue: its natural draught pulls the smoke up and away from the seating. Atlas, a Corten steel cylinder 1300 to 1800 mm high, raises its fire to the middle of the column, sending the light towards the surrounding seats. Both burn wood: real logs, real embers.
Ignis and Pharos: a flame on the wall, a frame at the threshold
Where floor space is precious, the Ignis wall-mounted fireplace, 900 to 1500 mm long, hangs at the height of the seating and makes the wall itself the backdrop of the fire. The Pharos vertical fireplace plays the part of a landmark: its open Corten frame, 1200 to 1800 mm tall, lets the view pass through while a sheltered flame burns low inside it, which makes it a natural marker at the entrance to a terrace or beside a water basin. Both run on bioethanol.
Before the first fire
Keep the flame in the open air: a room, an enclosed space or the underside of a low awning are all ruled out. Under Prométhée, Atlas and Pharos, plan a stable, non-combustible base, stone or concrete for instance; respect the distances set out in each model's instructions, and any local regulations on outdoor fires. Have water or an extinguisher close by, and never leave a lit fireplace unwatched. The four models are supplied ready to install, though Cortenys itself carries out no work on site, and they come without varnish, as do all our fire pieces. Once a fire has burned, children and pets stay back until the steel has cooled.
FAQ
Which Corten fireplace can be fixed to a wall?
Only Ignis. It hangs on the wall, opens at the top and leaves the floor completely free, which suits a narrow terrace or a courtyard where every metre counts. At around 24 to 45 kg depending on its length, it calls for a wall and a fixing validated by a professional before you order. Prométhée, Atlas and Pharos all stand on the ground.
Which fireplace suits a terrace close to the neighbours?
A bioethanol model, Ignis or Pharos: its clean flame gives off no smoke and leaves no ash to clear. With wood, in Prométhée or Atlas, dry, well-seasoned logs smoke little, and it pays to look at where the prevailing wind will carry the smoke before choosing the spot, so that it drifts away from windows and neighbouring terraces.
Where are the logs kept?
Both wood-burning models have a place for them: Prométhée keeps the evening's supply in its base, and Atlas in a low niche beneath its hearth. For a larger stock, a Corten steel log store placed nearby keeps the wood in order and well aired, in the same patina as the fireplace. Ignis and Pharos need no logs at all.
Corten steel outdoor fireplaces / The models
Our selection of Corten steel outdoor fireplaces
We shape each creation by hand, with the care that your space deserves.

Outdoor fireplaces, wall-mounted and vertical fires
The spirit of the collection
Compare the forms.
Corten steel fire pit or fire table: which to choose?Cortenys
Caring for your Corten steel outdoor fireplaces

01 / Advice
A clear space
The Corten steel exterior fireplace is chosen for its silhouette as much as for the presence of the fire. An exterior fireplace in Corten steel combines the verticality of the design with a warm texture, designed to compose the space from a distance as well as up close. Provide a suitable support and the clearances in the instructions. Evaluate the elements close to the fireplace and access for its maintenance before choosing the model. The Maison shapes your creation by hand, after your order, with the options offered by the model.



02 / Advice
A creation tailored to the space
We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

03 / Advice
Certified Corten from Italy, three weeks of hand patina
We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

04 / Advice
The varnish option, to support your use
Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

05 / Advice
Delivery of 5 to 12 weeks
We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

06 / Advice
The demands of the House, even in the service
We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.
07 / Cortenys
A column that comes alight at nightfall
Atlas, a cylindrical Corten steel outdoor fireplace, opens its hearth at mid-height and keeps its logs in a low niche. Three heights, up to 1800 mm.
08 / Cortenys
Fire hung on the wall
Ignis is fixed to the wall and runs a line of bioethanol flame along its full length: the terrace stays clear, and the wall becomes the setting.
09 / Cortenys
A flame at eye level
The Prométhée fireplace soars as a pyramid: natural draught, open hearth and a log store at its base, beneath the Cortenys signature patina.
Corten steel outdoor fireplaces / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Cortenys signature patina
three weeks
We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilise it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Corten steel outdoor fireplaces: frequently asked questions
Why choose a Corten steel outdoor fireplace?
Because it gives fire a vertical line: the flame can be seen from across the terrace, and the fireplace structures the space at every hour. Corten steel needs no paint; its patina protects the metal and echoes the colour of the embers.
What formats are available?
We present dimensions and options on each product sheet. We study any bespoke format before committing.
Can Corten stain the floor?
We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.
How to prepare for delivery?
We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.
Which finish to choose for Corten?
We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections



