
Bottomless planters for open ground
Corten steel raised beds and bottomless planters
Bottomless Corten steel planters for raised beds on open ground.
Corten raised beds on open ground: a frame of steel, roots in the soil
Rhéa for a single tree, Gaïa for a line of planting
Rhéa is a square bottomless planter made from 2 mm Corten steel, from 400 to 1400 mm a side and 400 to 1000 mm high. Set on a lawn or in a bed, it gives an olive tree or a few shrubs a raised frame of steel, while the ground beneath stays open to the roots. Gaïa, its rectangular counterpart in the same steel, runs from 900 to 2000 mm long and 300 to 600 mm wide, from 400 to 1000 mm high as well. Planted with boxwood, ornamental grasses or shrubs, it becomes a living screen along a terrace or beside a pond. Both lift the planting above the lawn and keep it clear of the mower.
Planting in full sun
In a sunny spot, the steel walls of a Corten raised bed warm up: line them with a thick geotextile or an insulating layer before filling, so that sensitive roots keep cool and the soil no longer presses straight against the metal. Water as often as the planting needs, but never let water stand at the foot of the walls, because Corten has to dry out between two wettings. If the bed is meant for herbs or vegetables, note that we make no food-contact claim for these bottomless Corten planters. Rhéa and Gaïa leave our workshop already patinated, so their warm tones are there from the first day.
Pale edges, or a stable colour
Along a pale path or a limestone edge, take the protective varnish, an option on both models: it seals the patina and strongly reduces rust run-off on the stone, without ruling it out. For a fixed colour instead of a living patina, Rhéa and Gaïa also come in powder-coated aluminium, in a choice of eight colours. For other shapes, for drainage and for sheet thickness, our buying guide for Corten planters goes further.
FAQ
Can a Corten planter without a base stand on paving?
Not as intended. Rhéa and Gaïa are open at the bottom and designed for open ground. On paving, a slab or a balcony, the answer is a planter that has a base and keeps its soil inside the steel: our Corten steel planter boxes include deep cubes, long lines and a model raised on four legs.
Will tree roots push the walls out of line?
Rhéa and Gaïa are made from 2 mm Corten steel, which our guide recommends for bottomless planters and large formats, so the walls stay straight as roots press against them. And with the base open, the roots are never confined to a closed volume: they carry straight on down into the garden soil beneath.
Can several bottomless planters be set in a line?
Yes, and it is often where they look best. Lined up, Gaïa planters trace a path, divide the garden into rooms or edge a terrace, while repeated Rhéa frames set a rhythm across a lawn. Each frame comes with its own nuances of patina, yet the row still reads as one line.
Bottomless Corten steel planters / The models
Our selection of Corten steel raised beds and bottomless planters
We shape each creation by hand, with the care that your space deserves.

Bottomless planters for open ground
The spirit of the collection
Compare square and rectangular models and check installation details.
How to choose a Corten steel planterCortenys
Caring for your Corten steel raised beds and bottomless planters

01 / Advice
Plant in contact with the ground
The design of a Corten bottomless container frames the soil without interrupting rooting. The warmth of real Corten steel accompanies the plant, with a hand-worked patina and nuances specific to each creation. Rhéa and Gaïa organize plantings in the ground, particularly for a vegetable container project. Prepare the ground and check the height and access for maintenance; no particular nutritional aptitude is asserted. No stock of finished creations: each creation is shaped by hand after its owner's order.



02 / Advice
A creation tailored to the space
We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

03 / Advice
Certified Corten from Italy, three weeks of hand patina
We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

04 / Advice
The varnish option, to support your use
Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

05 / Advice
Delivery of 5 to 12 weeks
We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

06 / Advice
The demands of the House, even in the service
We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.
07 / Cortenys
Set straight on open ground
Without a base, Rhéa and Gaïa let roots grow down into the soil: the maple and the lavender find all the depth of earth they need.
08 / Cortenys
A line of Corten steel to hold the border
Square around a cluster of birches, rectangular along a path: the bottomless planter gives the border a crisp outline without enclosing it.
Bottomless Corten steel planters / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Cortenys signature patina
three weeks
We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilise it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Corten steel raised beds and bottomless planters: frequently asked questions
What is a bottomless Corten steel planter for?
It sits directly on open ground. Roots reach the soil, water drains away naturally, and the planting volume is no longer limited by the container.
What formats are available?
We present dimensions and options on each product sheet. We study any bespoke format before committing.
Can Corten stain the floor?
We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.
How to prepare for delivery?
We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.
Which finish to choose for Corten?
We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections

