
Water blades and wall fountains
Corten steel water walls
Corten steel water walls for gardens and terraces.
A Corten water wall for courtyards and terraces
Célestin on the wall, Léandre as a backdrop
In an enclosed courtyard or on a shaded terrace, a Corten water wall brings the sound of falling water close to where people sit. Célestin, a wall-mounted Corten fountain, makes use of a wall you already have, around a garden, a patio or a pool: fixed near the top, its blade, 1000 to 3000 mm long and 600 or 1000 mm high, lets the water slide down the masonry in a single sheet. With Léandre, the water runs down a vertical panel of 2 mm Corten that is part of the piece, 1200 to 1600 mm high, which makes it a backdrop in itself against a façade or closing off the far end of a courtyard.
When the light goes
At dusk, the LED set into each blade lights the falling water, and the curtain turns into a line of light against the wall or the panel, with the warm tones of the patina showing through; by day, the moving veil plays with changing reflections and a quiet murmur instead. Pump and lighting are both supplied, so the only thing to add is power: a protected outdoor power point, which a qualified electrician should fit or check. Both arrive ready for your own contractor to install, as Cortenys does not work on site.
By the pool, or set back from it
For a curtain that lands in the swimming pool itself, choose Célestin or Léandre in powder-coated aluminium, presented with our aluminium water features: pool water, salt pools included, attacks the Corten patina. A Corten water wall is kept out of reach of the splashes and falls into a basin of its own, so that only clear water, never pool water, runs over the steel. The protective varnish, offered on both models, then fixes the patina where it is and strongly reduces run-off on pale stone, without ruling it out.
FAQ
Can the water wall run all year round?
Where it never freezes, it can: our installation guide notes that in mild regions a water feature may run all year, provided you stay alert to cold nights. Where frost does occur, drain it beforehand and store the pump under cover. In every season, the pump must stay submerged and never run dry.
Can Célestin hang on any wall?
Only on a wall able to take it. Depending on its length, Célestin weighs from 43 kg to 109 kg in Corten steel, so have a professional assess the wall and its fixings at the planning stage. In powder-coated aluminium, the same blade starts at 22.4 kg, a lighter option where the structure is in doubt.
Does the running water change the patina?
It deepens it: under the veil of water, the tones of the Cortenys signature patina gain in intensity. Keep that water clear and regularly renewed, with no chlorine or bleach, which would harm the patina.
Corten steel water walls / The models
Our selection of Corten steel water walls
We shape each creation by hand, with the care that your space deserves.

Water blades and wall fountains
The spirit of the collection
Discover Léandre and Célestin and check the installation requirements of each design.
Installing a Corten steel fountain or water featureCortenys
Caring for your Corten steel water walls

01 / Advice
Think about the entire composition
The blade of a Corten steel water wall gives relief to a courtyard, patio or garden background. The House accords the flow, proportions and warmth of the patina to compose an architectural presence. Check the equipment provided, the required pool and the connections on the product page. Maintain access to technical elements for maintenance. Each creation is made by hand, to order, for the person who chose it.



02 / Advice
A creation tailored to the space
We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

03 / Advice
Certified Corten from Italy, three weeks of hand patina
We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

04 / Advice
The varnish option, to support your use
Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

05 / Advice
Delivery of 5 to 12 weeks
We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

06 / Advice
The demands of the House, even in the service
We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.
07 / Cortenys
A blade of water drawn across Corten steel
Léandre sends a smooth curtain of water down its vertical panel; pump and LED lighting are included, and the basin is yours to choose.
Corten steel water walls / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Cortenys signature patina
three weeks
We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilise it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Corten steel water walls: frequently asked questions
What is a Corten steel water wall?
It is a vertical fountain: a blade of water pours in a smooth curtain down a panel or from a wall, then falls into a basin. In Corten steel, the piece carries a warm patina that answers the reflections of the water.
What formats are available?
We present dimensions and options on each product sheet. We study any bespoke format before committing.
Can Corten stain the floor?
We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.
How to prepare for delivery?
We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.
Which finish to choose for Corten?
We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections


