Search for a product

All products
Cortenys
Ignis wall-mounted fireplace in Corten steel lit, front view on a stone wall lit by the flames

Outdoor fireplaces, wall-mounted and vertical fires

Corten steel outdoor fireplaces

Corten steel outdoor fireplaces: Prométhée and Atlas for wood fires, the wall-mounted Ignis and the vertical Pharos for bioethanol.

Ignis

Choosing a Corten outdoor fireplace: wood or bioethanol, floor or wall

Prométhée and Atlas: wood fires with height

For the crackle and embers of a real wood fire, there are two silhouettes to choose from. The Prométhée outdoor fireplace takes the shape of a slender pyramid: its tapering form creates a natural draught that lifts the flame and carries smoke away from your guests, while its base holds the wood for the evening. It measures 350 to 400 mm square and 1150 to 1400 mm high, weighing 35 to 48.7 kg. Atlas is a single vertical cylinder, 400 to 500 mm across and 1300 to 1800 mm high (around 49 to 85 kg): the hearth is set halfway up, a second opening lower down takes the logs, and because the column has no front or back, it reads from every side and softens the straight lines of a terrace.

Ignis and Pharos: the clean flame of bioethanol

Ignis and Pharos burn bioethanol, for a steady, smokeless flame and no ash to clear. The Ignis wall-mounted fireplace is a long, shallow trough that fixes to the wall and opens at the top: 900 to 1500 mm long (around 24 to 45 kg), it takes up no ground space at all and lights a stone façade or boundary wall from below. Cortenys does not install on site, so have the wall and the fixings approved by a professional. The Pharos vertical fireplace stands instead on a flat base: two uprights and a crossbar form an open frame, with the flame sheltered behind transparent panels in its lower third, for an overall height of 1200 to 1800 mm (around 50 to 95 kg).

Placing a garden fireplace

All four are made for life outdoors: no Corten steel fireplace in the collection is designed for use indoors, in an enclosed space or beneath a low awning. Prométhée, Atlas and Pharos need firm, non-combustible ground such as stone paving, concrete, pavers or compacted gravel, and each model comes with its own clearances and instructions, to be followed closely. It is also worth checking local rules, since some local authorities limit outdoor fires, particularly in dry weather. With wood, note where the prevailing wind blows, so the smoke drifts neither towards your windows nor into the neighbours' garden, and burn well-seasoned logs, which smoke less.

FAQ

Does a bioethanol fireplace give as much heat as a wood fire?

No. Bioethanol gives a gentler warmth, more for atmosphere: a steady flame, lit in an instant and leaving no ash. For radiant heat and embers through a long evening, choose one of the wood-burning pair, Prométhée or Atlas, and keep well-seasoned logs dry in a log store in the same patina. Fuel is not supplied with any of the four.

Does an outdoor fireplace need to come in for the winter?

No. Corten steel can stay outdoors all winter: frost does not reach the patina, and each cycle of rain and drying keeps it alive. Just make sure water never collects at the bottom of the hearth, and clear out wet leaves or anything else that would hold moisture against the steel.

Can a Corten fireplace go near the sea or a swimming pool?

With care. Sea spray and pool water carry chlorides that stop the patina from stabilising, and since our fire pieces are offered without varnish, they belong in the most sheltered spots. Where spray reaches the garden directly, raw Corten steel has no place; beside a pool, set the fireplace well back from the splashes and rinse it with fresh water if it gets wet.

Ignis wall-mounted fireplace in Corten steel lit, close three-quarter view on a stone wall

Outdoor fireplaces, wall-mounted and vertical fires

The spirit of the collection

Compare the forms.

Corten steel fire pit or fire table: which to choose?

Cortenys

Caring for your Corten steel outdoor fireplaces

Atlas outdoor fireplace in Corten steel lit on a covered terrace facing snowy mountains

01 / Advice

A clear space

The Corten steel exterior fireplace is chosen for its silhouette as much as for the presence of the fire. An exterior fireplace in Corten steel combines the verticality of the design with a warm texture, designed to compose the space from a distance as well as up close. Provide a suitable support and the clearances in the instructions. Evaluate the elements close to the fireplace and access for its maintenance before choosing the model. The Maison shapes your creation by hand, after your order, with the options offered by the model.

Prométhée outdoor fireplace in Corten steel lit on a wooden deck by a pergola, high-angle view
Pharos vertical fireplace in Corten steel lit at sunset, low-angle view by a swimming pool
Close-up of the flames of the Ignis wall-mounted fireplace in Corten steel, slight low-angle view

02 / Advice

A creation tailored to the space

We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

Pharos vertical fireplace in Corten steel lit beside a swimming pool, covered lounge behind

03 / Advice

Certified Corten from Italy, three weeks of hand patina

We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

Prométhée outdoor fireplace in Corten steel lit, seen through banana leaves in a garden

04 / Advice

The varnish option, to support your use

Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

Open firebox of the Prométhée outdoor fireplace in Corten steel, close low-angle view

05 / Advice

Delivery of 5 to 12 weeks

We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

Prométhée outdoor fireplace in Corten steel lit under a pergola, three-quarter view

06 / Advice

The demands of the House, even in the service

We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.

07 / Cortenys

A column that comes alight at nightfall

Atlas, a cylindrical Corten steel outdoor fireplace, opens its hearth at mid-height and keeps its logs in a low niche. Three heights, up to 1800 mm.

08 / Cortenys

Fire hung on the wall

Ignis is fixed to the wall and runs a line of bioethanol flame along its full length: the terrace stays clear, and the wall becomes the setting.

09 / Cortenys

A flame at eye level

The Prométhée fireplace soars as a pyramid: natural draught, open hearth and a log store at its base, beneath the Cortenys signature patina.

Made to order

The time each piece deserves.

We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.

Illustrative timeline

5 to 12 weeks

  1. Preparation

    Included in the total lead time

    We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.

  2. Making

    Included in the total lead time

    We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.

  3. Cortenys signature patina

    three weeks

    We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilise it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.

  4. Delivery

    Included in the total lead time

    We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.

We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.

Cortenys

Corten steel outdoor fireplaces: frequently asked questions

Why choose a Corten steel outdoor fireplace?

Because it gives fire a vertical line: the flame can be seen from across the terrace, and the fireplace structures the space at every hour. Corten steel needs no paint; its patina protects the metal and echoes the colour of the embers.

What formats are available?

We present dimensions and options on each product sheet. We study any bespoke format before committing.

Can Corten stain the floor?

We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.

How to prepare for delivery?

We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.

Which finish to choose for Corten?

We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.

Does a Corten steel outdoor fireplace rust, and is it safe?

Yes, it rusts, and that is its strength: the stable oxide patina protects the core of the steel. Corten withstands fire, and the patina may shade around the hearth without affecting the piece. Stand the fireplace on a stable, non-combustible surface, follow the clearances and instructions specific to the model, remove wet ashes once everything has cooled, and keep children and pets away until it has cooled.

A particular project in mind?

We study your space, its dimensions and its finish. We select projects to which we can give our full attention.

Delivery to the United Kingdom

Our retail prices in pounds sterling include delivery to the United Kingdom, VAT, customs duties and import taxes. Each piece is made to order and reaches you within 5 to 12 weeks.