
Tapered, flared and cylindrical pots
Corten steel pots
Corten steel plant pots, from the round cylindrical Callisto and slim Clio to the tapered Calypso and flared Daphné.
Choosing a Corten steel pot
Four silhouettes, one plant to show off
A Corten steel pot puts one plant centre stage, whether on its own by the front door or repeated along a terrace. Maison Cortenys designs four shapes. Callisto, a smooth cylindrical pot, comes in many diameters and heights, up to sizes that will take an olive tree, for anyone looking for round Corten steel planters. Clio, a slim-profile round pot, narrows to a rimless cone that suits trailing grasses. Calypso echoes the familiar tapered flowerpot; Daphné, square and flared, raises the planting. Calypso and Daphné are made in 2 mm Corten steel.
Matching the pot to the plant
Choose the volume for the plant's mature root growth, not its size on the day you buy it. Check the drainage of your chosen model on its product page. At the bottom, a drainage layer of clay pebbles or gravel under a geotextile fleece keeps wet soil from staying packed against the steel; in full sun, a thick fleece keeps roots cool. Leave room around your Corten plant pots for watering, repotting and cleaning.
Patina, terraces and roof gardens
Every Corten steel flower pot arrives already dressed in the Cortenys signature patina, applied in our workshop; its tones then evolve with exposure. On pale paving, water from rain or watering can leave marks: a bed of gravel or a dark slab protects the ground; the protective varnish, optional on selected models, greatly reduces them without ruling them out. Right by the sea, where salt spray keeps the patina from stabilising, we would point you towards our powder-coated aluminium pots instead.
FAQ
Round, tapered or flared: which pot should I choose?
The cylindrical Callisto suits upright plants such as an olive tree; Clio's cone shows off trailing plants; Calypso and Daphné, more flared, give height to an entrance.
What goes at the bottom of a Corten steel pot?
A drainage layer of clay pebbles or gravel under a geotextile fleece, so wet soil does not sit against the wall and the roots can breathe.
Can a Corten pot go on a roof terrace?
Yes, our garden scenes show them on rooftops. Check the weight of the planted pot and access for watering, and protect pale surfaces.
Corten steel pots / The models
Our selection of Corten steel pots
We shape each creation by hand, with the care that your space deserves.

Tapered, flared and cylindrical pots
The spirit of the collection
Compare silhouettes and sizes.
How to choose a Corten steel planterCortenys
Caring for your Corten steel pots

01 / Advice
One plant, one volume
We follow with Callisto a curve that the light does not leave. With Calypso we open the pot to the sky and take care of its wide rim. We shape these profiles by hand, after your order, in authentic, certified Corten steel from Italy. We look for the volume that accompanies the plant, alone or in composition. We invite you to check the drainage, the place of the adult roots and the access for watering, repotting and cleaning around the pot.



02 / Advice
A creation tailored to the space
We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

03 / Advice
Certified Corten from Italy, three weeks of hand patina
We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

04 / Advice
The varnish option, to support your use
Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

05 / Advice
Delivery of 5 to 12 weeks
We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

06 / Advice
The demands of the House, even in the service
We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.

07 / Cortenys
On the rooftops, the cylinder and the cone
Callisto, a round Corten steel pot, holds an olive tree; Clio, a taut cone without a rim, lets grasses spill over its edge.
08 / Cortenys
Two silhouettes for an entrance
Calypso takes up the tapered profile of the timeless flower pot; Daphné, a flared square pot, carries the planting up high. Both in 2 mm Corten steel.

Corten steel pots / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Cortenys signature patina
three weeks
We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilise it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Corten steel pots: frequently asked questions
What is the difference between a pot and a Corten steel planter?
A pot is a vertical volume, often round or flared, set alone, in pairs or in groups: it showcases a single plant. A planter, longer, edges a terrace, accompanies a hedge or separates two spaces.
What formats are available?
We present dimensions and options on each product sheet. We study any bespoke format before committing.
Can Corten stain the floor?
We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.
How to prepare for delivery?
We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.
Which finish to choose for Corten?
We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections



