
Tables, chairs and armchairs for the home
Corten steel tables and seating
Corten steel tables and seating: Orphée, Dorian, Silas, Eurydice and Hestia.
Choosing a Corten table and seating for the home
A dining table and its chairs
Orphée pairs a marble top, black veined with white or white veined with grey, with two broad Corten steel bases, each a band of steel folded into an angled loop. Set well back beneath a generous overhang, they leave plenty of legroom and space for the chairs. This Corten table ranges from 2000 × 1000 to 2800 × 1200 mm, always 750 mm high, with an indicative weight of roughly 225 to 350 kg. Eurydice, the Corten chair designed to go with it, is a cantilever: a flat steel blade rises from the floor, sweeps up behind the seat in a single line and carries on into the back, with no rear legs. Its upholstered seat and back come in black or white, matched to the marble or set against it, while the steel keeps its patina.
Two Corten coffee tables: stone or timber
In front of a sofa, shape comes first. Dorian is a square of white-veined black marble, 800 to 1200 mm a side, resting on a Corten steel case whose recessed base casts a shadow and makes the volume seem to float. Silas stretches from 1400 × 600 to 1800 × 800 mm: two thick timber beams laid side by side form its top, carried and joined at each end by an open Corten steel frame. Both stand 350 mm high, with indicative weights of about 75 to 150 kg for Dorian and 115 to 170 kg for Silas. Marble suits a pared-back, mineral living room; timber warms a room that opens onto wide glazing.
Hestia, and a varnish made for interiors
Hestia, a Corten armchair in ecru bouclé, holds a deep seat cushion within an enveloping back and closed armrests, while a low base with rounded corners anchors it to the floor. From 760 × 740 × 760 to 920 × 880 × 800 mm, it sits alone by a window or as a pair around a coffee table. Like the other four pieces, it receives the Cortenys signature patina in the workshop, then a clear, colourless protective varnish applied by hand: the rust, sienna and amber tones stop evolving, and the varnish strongly reduces rust transfer to floors and contact surfaces, without ruling it out: we recommend felt pads under the feet and no direct contact with light or porous floors.
FAQ
Is Corten steel suitable for warm climates?
Corten's one condition is being able to dry between showers; in dry air its patina still stabilises, only more slowly than in a maritime climate, as our Corten steel guide explains. Strong sun matters for another reason: like any dark metal, Corten heats up in full sun, worth bearing in mind for a south-facing seat. Our tables and seating are designed for indoors and arrive varnished.
Will Corten seating mark clothes?
Very unlikely with these pieces. A young, raw sheet can mark hands and pale clothing, especially when damp, whereas a stabilised patina does not stain. Eurydice and Hestia arrive patinated and then varnished in the workshop, and the varnish strongly reduces any transfer, without ruling it out entirely. You also sit on upholstery: a padded seat and back on Eurydice, a thick bouclé cushion on Hestia.
How should a Corten and marble table be cared for?
The varnished Corten steel needs nothing more than a damp sponge; even varnished, Corten can still mark a light or porous floor, so keep felt pads under the feet. The varnish covers the metal alone: the marble of Orphée and Dorian, like the timber of Silas, keeps its own finish. Keep acidic products off the stone, since marble and limestone are sensitive to acids, and leave any stubborn stain to a professional.
Corten steel tables and seating / The models
Our selection of Corten steel tables and seating
We shape each creation by hand, with the care that your space deserves.

Tables, chairs and armchairs for the home
The spirit of the collection
Explore the collection, dimensions and finishes.
Corten steel garden ideas: 9 ways to shape a garden or terraceCortenys
Caring for your Corten steel tables and seating

01 / Advice
Match table and seats
In Corten tables and seats, the House takes care of the proportions and the meeting of materials. Check the heights, passages and intended use on the product pages. For interiors, the varnish limits runs and deposits without excluding stains; protect sensitive media. The Maison shapes your creation by hand, after your order, with the options offered by the model.



02 / Advice
A creation tailored to the space
We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

03 / Advice
Certified Corten from Italy, three weeks of hand patina
We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

04 / Advice
The varnish option, to support your use
Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

05 / Advice
Delivery of 5 to 12 weeks
We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

06 / Advice
The demands of the House, even in the service
We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.

07 / Cortenys
A dining room in Corten steel and marble
Orphée carries a marble top on two loops of Corten steel, surrounded by Eurydice chairs. Indoor pieces, delivered with our protective varnish; even varnished, Corten can still mark a light floor, so we recommend felt pads under the feet.

08 / Cortenys
Two coffee tables, two noble materials
Dorian crowns a Corten steel plinth with veined black marble; Silas sets two beams of solid wood on patinated frames.

09 / Cortenys
The softness of bouclé, the anchor of Corten
Hestia wraps a seat in ecru bouclé and sets it on a Corten steel base patinated in the workshop. Three sizes, made to order.

Corten steel tables and seating / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Cortenys signature patina
three weeks
We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilise it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Corten steel tables and seating: frequently asked questions
Can Corten steel furniture be used indoors?
Yes, on one condition: varnish. At Cortenys, every piece intended for indoor use receives the mandatory protective varnish, over the signature patina applied in the workshop.
What formats are available?
We present dimensions and options on each product sheet. We study any bespoke format before committing.
Can Corten stain the floor?
We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.
How to prepare for delivery?
We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.
Which finish to choose for Corten?
We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections




