Search for a product

All products
Cortenys
Célestin water wall in Corten steel, front view on a beige stone wall, water sheet into a basin

Water blades and wall fountains

Corten steel water walls

Corten steel water walls for gardens and terraces.

Célestin Corten Water Wall

Choosing a Corten water wall: a blade on the wall or a panel of its own

Célestin and Léandre, two ways to bring water down

A Corten water wall turns a blank surface into a moving curtain of water that glows once the light fades. Célestin is a wall-mounted Corten fountain, fixed high on an existing garden or patio wall: a smooth sheet of water spills along its full width and runs down the wall below. Its blade comes in lengths from 1000 to 3000 mm, in heights of 600 or 1000 mm. Léandre brings its own vertical panel in 2 mm Corten steel, 1000 to 3000 mm wide and 1200 to 1600 mm high: a waterfall wall to set against a façade or a hedge, or to close a vista. Both are supplied with a submersible pump and LED lighting built into the blade.

Where the water comes to rest

Neither water wall includes a catch basin. The water can fall into a reflecting pool you already have, or into Narcisse, a rectangular basin in 3 mm Corten steel supplied without pump or LEDs, which then becomes the receiving basin. If the water is to pour into a swimming pool, we recommend Célestin in powder-coated aluminium: chlorinated water stops the Corten patina from stabilising, and salt spray does the same on the seafront. Célestin and Léandre both come in aluminium, in eight colours including black RAL 9005, among our aluminium fountains and water walls.

Fixings, power and access to the pump

Célestin weighs 43 to 109 kg depending on the size and Léandre 60.7 to 142 kg, so have the wall, anchoring and fixings approved by a professional. The pump and LEDs need a weatherproof outdoor socket with residual-current protection, installed or checked by a qualified electrician; lay a duct for the cable before the paving goes down. When you fill it, make sure the blade is level both ways, since one that is not true gives an uneven curtain, and keep the submersible pump within reach for cleaning. Pieces arrive ready to install and Cortenys does not provide on-site installation; our guide Installing a Corten steel fountain or water feature takes you through each step.

FAQ

How do Léandre and Célestin use an existing garden wall?

Célestin mounts high on a wall that is already there, whereas Léandre brings its own upright panel to the composition. Choose according to whether you want the existing surface to remain the backdrop or a separate panel to frame the falling water. Have a professional approve the support and attachment before installation.

Can Célestin send its water directly into a swimming pool?

For water falling straight into a swimming pool, choose Célestin in aluminium. Our guide recommends that material wherever chlorinated or salt pool water touches the piece directly. Keep a Corten water wall away from regular splashes, choose the protective varnish offered on both models, which greatly reduces run-off on pale coping without ruling it out, protect the coping at the foot of the wall with a bed of gravel or a dark slab, and discuss the setting with us before ordering.

What effect does the LED create after sunset?

The LED is integrated into the water blade on both models and lights the falling curtain after dark. It gives the wall a second presence once the garden's daytime outlines fade. The light and pump need an outdoor power supply: arrange the connection with a qualified electrician when planning the location.

Léandre water wall in Corten steel, three-quarter view, water sheet reflected in the basin, trees and blue sky

Water blades and wall fountains

The spirit of the collection

Discover Léandre and Célestin and check the installation requirements of each design.

Installing a Corten steel fountain or water feature

Cortenys

Caring for your Corten steel water walls

Célestin water wall in Corten steel on a beige façade, wide view with sun loungers in the foreground

01 / Advice

Think about the entire composition

The blade of a Corten steel water wall gives relief to a courtyard, patio or garden background. The House accords the flow, proportions and warmth of the patina to compose an architectural presence. Check the equipment provided, the required pool and the connections on the product page. Maintain access to technical elements for maintenance. Each creation is made by hand, to order, for the person who chose it.

Narcisse rectangular water basin in Corten steel on a paved terrace facing the sea at sunset
Léandre water wall in Corten steel between tall ornamental grasses, water sheet falling into a basin
Narcisse rectangular water basin in Corten steel, front view on a lawn, in front of a row of trees

02 / Advice

A creation tailored to the space

We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

Léandre water wall in Corten steel in close framing, water sheet falling into the basin between two hedges

03 / Advice

Certified Corten from Italy, three weeks of hand patina

We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

Narcisse rectangular water basin in Corten steel from a low angle on a lawn, under a blue sky

04 / Advice

The varnish option, to support your use

Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

Narcisse rectangular water basin in Corten steel, front view on a timber deck, wooded mountains beyond

05 / Advice

Delivery of 5 to 12 weeks

We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

Narcisse rectangular water basin in Corten steel seen from above along a stone balustrade, mountains beyond

06 / Advice

The demands of the House, even in the service

We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.

07 / Cortenys

A blade of water drawn across Corten steel

Léandre sends a smooth curtain of water down its vertical panel; pump and LED lighting are included, and the basin is yours to choose.

Made to order

The time each piece deserves.

We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.

Illustrative timeline

5 to 12 weeks

  1. Preparation

    Included in the total lead time

    We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.

  2. Making

    Included in the total lead time

    We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.

  3. Cortenys signature patina

    three weeks

    We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilise it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.

  4. Delivery

    Included in the total lead time

    We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.

We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.

Cortenys

Corten steel water walls: frequently asked questions

What is a Corten steel water wall?

It is a vertical fountain: a blade of water pours in a smooth curtain down a panel or from a wall, then falls into a basin. In Corten steel, the piece carries a warm patina that answers the reflections of the water.

What formats are available?

We present dimensions and options on each product sheet. We study any bespoke format before committing.

Can Corten stain the floor?

We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.

How to prepare for delivery?

We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.

Which finish to choose for Corten?

We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.

A particular project in mind?

We study your space, its dimensions and its finish. We select projects to which we can give our full attention.

Delivery to Switzerland

Our retail prices in Swiss francs include delivery to Switzerland, VAT, customs duties and import taxes. Each piece is made to order and reaches you within 5 to 12 weeks.