
Rectangular and round water basins
Aluminium water basins and reflecting pools
Round and rectangular aluminium water basins and reflecting pools.
Round aluminium water bowl or rectangular basin: choosing a reflecting pool
Two shapes for still water
The round basin is the aluminium water bowl of the pair: 1000 to 2500 mm across and always 500 mm high, it reads the same from every side and settles at the heart of a courtyard, a lawn or an open terrace. The rectangular basin runs from 1250 × 800 to 3000 × 2000 mm and stands 500 or 600 mm high depending on the size; it follows the architecture instead, along a façade, beside a path or at the edge of the paving. Both are made from 4 mm powder-coated aluminium and supplied without pump or lighting. Long and straight-sided, the rectangle may recall an aluminium trough, yet neither piece is a livestock trough or a storage tank: each is a raised aluminium pond, made to hold still water as a mirror.
Lighter than Corten, kinder to pale stone
Size for size, an aluminium water basin weighs about half as much as its Corten steel counterparts: 95 kg against 207.2 kg for Narcisse at 2500 × 1250 × 600 mm, and 29 kg against 62.9 kg for Ondine at 1000 mm across. That matters when the basin has to be carried up to a raised terrace, a setting for which our guide recommends aluminium in any case. Once filled, most of the load is water, so the capacity of the structure should be confirmed by a professional. Aluminium is kinder to pale stone, too: its powder-coated colour stays put and nothing runs off onto limestone paving or pale pool coping.
Still water, or a falling sheet of water
Left on its own, each basin holds a perfectly calm surface, with nothing to plug in. The rectangle can also become the receiving basin for our Léandre and Célestin water walls, which come with their own pump and LED lighting but no basin; Léandre stands as a vertical panel of its own, while Célestin is fixed high on a wall already in place, so have that fixing checked by a professional. Both are offered in the same eight colours as the basins, from black RAL 9005 to white, blue or orange, so wall and basin can share a single shade. The round basin, for its part, can be brought to life with a pump and water jet chosen for your project.
FAQ
Should a reflecting pool be in aluminium or Corten steel?
Aluminium is our answer wherever pool water reaches the basin directly, in gardens exposed to sea spray and on raised terraces. Corten steel brings a living patina in earthy tones and belongs away from sea spray; it is also the only material for Sélène, our low, shallow bowl.
How heavy is an empty basin?
The round basin weighs 29 to 104 kg and the rectangular one 40.7 to 161 kg, depending on the size. Before ordering, check gates, paths and steps against those weights and the dimensions shown on the product page: the basin arrives ready to install, and on-site installation is not part of the Cortenys service.
What upkeep does an aluminium reflecting pool need?
Lift out leaves and debris regularly: a reflecting pool only reads as a mirror when its water is clear. The basin itself asks for very little, as powder-coated aluminium has no patina to watch and its colour does not shift; an occasional clean of the metal is enough.
Aluminium water basins / The models
Our selection of Aluminium water basins and reflecting pools
We shape each creation by hand, with the care that your space deserves.

Rectangular and round water basins
The spirit of the collection
Compare the designs and dimensions to suit your garden or terrace.
View collectionCortenys
Caring for your Aluminium water basins and reflecting pools

01 / Advice
Rectangular aluminium water basin, the architectural reflecting pool
The rectangular water basin is a volume with crisp edges, in six sizes: 1250 × 800 and 1500 × 1000 mm, 500 mm high; 2000 × 1000, 2500 × 1250, 3000 × 1500 and 3000 × 2000 mm, 600 mm high. The 2500 × 1250 mm size weighs 95 kg.



02 / Advice
Round aluminium water basin: a circle of calm water
The round basin draws a continuous line on the ground, with no angle and no break, in four diameters, 1000, 1500, 2000 and 2500 mm, all 500 mm high. Its 4 mm aluminium resists corrosion; the 1500 mm size weighs 50 kg.

03 / Advice
An aluminium basin facing the sea or beside the pool
Our water basins know nothing of rust and resist corrosion. Right on the coast, the House recommends its powder-coated aluminium pieces, and for a piece in direct contact with pool water, they are the most serene choice.

04 / Advice
Placing an aluminium water basin
Look for the reflection first: at the end of a vista, at the foot of a lit wall, at the edge of a terrace, wherever the reflecting pool will find sky. Then choose a stable, level base sized for the weight of the water: a full basin is heavy, and ground that shifts will tilt the waterline.

05 / Advice
Corten steel water basins: Narcisse, Ondine and Sélène
The rectangular aluminium water basin has its counterpart in Narcisse, in Corten steel; the round basin, in Ondine, in the same diameters; the Sélène is offered exclusively in Corten steel. For a reflecting pool sheltered from sea spray, in shades of earth and amber, discover our Corten steel water basins.

Aluminium water basins / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Finish and inspection
Included in the total lead time
We adapt the process to the material: the planned finish replaces the Corten patina. We check each creation by hand before packaging.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Aluminium water basins and reflecting pools: frequently asked questions
Does an aluminium water basin need a pump?
No. The rectangular basin and the round basin are deliberately delivered bare, with no pump or lighting: they hold calm water that acts as a mirror.
What is the difference between a water basin and an aluminium fountain?
A fountain sets water in motion: a central jet, a cascade or a water wall, with its integrated LED lighting. A water basin leaves it still, for a silent mirror that reflects the sky.
What size of rectangular water basin should you choose?
Measure the available space and the way the basin will be seen. The 1250 × 800 and 1500 × 1000 mm sizes suit a patio or a terrace; those from 2500 × 1250 to 3000 × 2000 mm become the focal point of a garden.
Does an aluminium water basin rust?
No. Aluminium does not rust.
Which colours are available for an aluminium water basin?
They are shown in black RAL 9005 at 30% gloss, which gives the water an inky depth. They also come in white 9016, grey 7016, blue 5001, yellow 1005, green 6018, red 3020 and orange 2004, and other shades from the RAL palette are offered on request, to match the reflecting pool to your façade or your paving.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections

