
Round, square and elongated fire tables
Corten steel fire tables
Corten steel fire tables in round, square and elongated shapes.
Choosing a Corten fire table, model by model
A central hearth: Hélios and Héphaïstos
Hélios and Héphaïstos set a wood-burning hearth at the centre of the top, the classic layout for arranging outdoor seating around a single fire. Both are made from 3 mm Corten steel, the thickness our Corten steel guide gives for pieces exposed to heat, and both stand just 280 mm high, so the flames stay in view from an armchair. Hélios, the round Corten fire table, comes in diameters of 1000 and 1250 mm, weighing 44 and 59 kg respectively. Héphaïstos is offered as a square of 900 to 1600 mm per side or as a 1500 × 800 mm rectangle, whose straight sides line up with a corner sofa or with a pair of facing sofas.
Long tables: Etna, Taranis and Pyrros
The three long designs measure 1500 to 2600 mm in length and 350 to 450 mm in height, depending on the size. Etna, wider at the top than at the base, carries a straight wood-burning hearth along most of its top and sits well in front of an outdoor sofa or on the edge of an open terrace. Taranis, also wood-burning, shifts its round hearth towards one end, so most of the surface stays clear for glasses and plates when you dine outdoors. Pyrros is our only bioethanol fire table: a long central slot in its thick top holds a low, steady flame, with an open surface on either side.
Placing your fire table
What sets a fire table apart from a fire pit is its top, which frames the flame with a usable surface and still serves as a low table once the fire is out. If you are weighing the two, our guide to choosing a fire pit or a fire table compares them in detail, along with wood and bioethanol. Every Corten steel fire table needs stable, non-combustible ground and the clearances given for the model. It arrives in the Cortenys signature patina, applied and inspected in our workshop and left unvarnished, like all our fire pieces; the colour keeps deepening outdoors, heat may shade it around the hearth and, like any dark metal, the steel warms up in full sun.
FAQ
Which fire table suits a small garden or a narrow terrace?
The most compact are Héphaïstos at 900 × 900 mm and Hélios at 1000 mm in diameter. For a narrow strip, Taranis is just 500 mm wide in its 1800 mm length, and Etna starts at 1600 × 600 mm. Whichever you choose, leave a comfortable walkway all the way round the fire.
Which models leave room for drinks and plates?
Taranis keeps its hearth at one end, so most of the top is clear for serving, and Pyrros leaves a surface on either side of its line of flame. On Hélios and Héphaïstos, the hearth takes the centre. Once lit, the hearth and its rim get hot: keep children and pets away until everything has cooled.
How much does a Corten fire table weigh?
Published weights range from 44 kg for the 1000 mm Hélios to around 160 kg for the 2200 mm Pyrros. Héphaïstos weighs 60 kg at 1000 × 1000 mm and 96 kg at 1400 × 1400 mm, while the largest Etna and Taranis come to around 155 and 145 kg. Choose the spot in advance: it is not a piece you move on a whim.
Corten steel fire tables / The models
Our selection of Corten steel fire tables
We shape each creation by hand, with the care that your space deserves.

Round, square and elongated fire tables
The spirit of the collection
Compare the designs and check the fuel specified for each model.
Corten steel fire pit or fire table: which to choose?Cortenys
Caring for your Corten steel fire tables

01 / Advice
Plan for traffic
The balance between the hearth and the top gives the Corten fire table its furniture character. The House works on the presence of volume as much as the patina, with use in accordance with the instructions for each home. Keep passages and seats out of heat zones indicated in the instructions. The fuel and authorized uses are verified model by model. No stock of finished creations: each creation is shaped by hand after its owner's order.



02 / Advice
A creation tailored to the space
We look at your space, the setback and the access points to find the right proportions. We invite you to compare dimensions and weight on the product pages. Individuals, architects or landscapers, entrust us with the desired atmosphere and the measurements of your project to study an adaptation.

03 / Advice
Certified Corten from Italy, three weeks of hand patina
We choose authentic, certified Corten steel from Italy, far from steel with a neglected patina. We shape each creation by hand, without exception. Three weeks of hand-worked patina reveal its nuances; we stabilize it as much as possible. We find a drawing, never quite the same light.

04 / Advice
The varnish option, to support your use
Depending on the creation or your request, we provide a protective varnish to limit dripping in contact with water and patina deposits. We require this varnish for interior models. We advise you according to the exposure and the support, recommending to protect light or porous surfaces. Even varnished, Corten can leave marks.

05 / Advice
Delivery of 5 to 12 weeks
We start after your order. We do not stock any finished creations: prolonged storage in closed packaging harms their patina. We deliver 5 to 12 weeks after confirmation, combining shaping, patina, rest, checks, hand packaging and transport. We invite you to prepare suitable access and handling means.

06 / Advice
The demands of the House, even in the service
We look at Corten like a new gold: its depth, its light and the time of our hands make its value. We are a House, not a factory. We may refuse a request to avoid overproduction and maintain care for each creation. We support you in the choice, the preparation of its arrival and after its delivery, with the same attention.
07 / Cortenys
Fire at the heart of the outdoor lounge
Around Hélios, a round fire table in 3 mm Corten steel, the seats fall naturally into place: no corners, no head of the table, everyone faces the flame.
08 / Cortenys
By the water, two ways of drawing fire
Taranis sets a round hearth at the end of a long top and leaves the rest to the table; Pyrros draws a line of bioethanol flame down the middle of a Corten steel slab.
09 / Cortenys
A line of embers facing the landscape
With its sloping sides, the Etna fire table stretches a long wood-burning hearth along almost its entire length, in three lengths made to order.
10 / Cortenys
The square, for generous gatherings
Héphaïstos, a crisp-edged monolith of Corten steel, sets its hearth at the heart of the block. Seven formats, from a 900 mm square to the rectangular version.

Corten steel fire tables / Perspectives
In their setting.
Made to order
The time each piece deserves.
We shape each creation by hand, without exception, after your order. No stock: storage in closed packaging harms the patina. We devote 5 to 12 weeks to artisanal work and care.
5 to 12 weeks
Preparation
Included in the total lead time
We check configuration, dimensions and delivery. For Corten, we choose an authentic material certified from Italy.
Making
Included in the total lead time
We shape each creation by hand, without exception. We take care of the folds, welds and adjustments to give the design its clean lines and precise assemblies.
Cortenys signature patina
three weeks
We work the Corten patina by hand over three weeks. Between each stage and period of rest, we return to its shades, then stabilise it as far as possible. Depending on the piece or your request, we provide a protective varnish to limit runoff when the metal meets water. We require varnish indoors and recommend protecting pale or porous surfaces.
Delivery
Included in the total lead time
We check and then package each creation by hand. We adapt its protections to transport to preserve angles and surfaces, avoiding trapping humidity against the patina.
We develop the Corten patina by hand over three weeks, within the overall delivery window of 5 to 12 weeks. We allow the material to rest, inspect it and prepare it carefully for its journey.
Cortenys
Corten steel fire tables: frequently asked questions
What is a Corten steel fire table?
It is a hearth set into a tabletop, sometimes called a fire pit table: you sit around it as you would around a table, and enjoy the flame from your chair. Where a fire pit is there to be gazed at, a fire table is there to be shared.
What formats are available?
We present dimensions and options on each product sheet. We study any bespoke format before committing.
Can Corten stain the floor?
We stabilize the patina as much as possible. Depending on the creation or your request, we offer a varnish to limit drips in contact with water, without excluding them. We recommend protecting light or porous floors with spacers, gravel or a saucer.
How to prepare for delivery?
We deliver 5 to 12 weeks after confirmation. We invite you to check access and handling, then unpack and check the creation upon receipt. In case of damage, send us photos of the creation and packaging with your order reference.
Which finish to choose for Corten?
We develop the Corten patina by hand over three weeks. Depending on the creation or your request, a protective varnish limits drips without excluding them. We require this varnish for indoor use and recommend protection of sensitive surfaces.
A particular project in mind?
We study your space, its dimensions and its finish. We select projects to which we can give our full attention.
Cortenys collections




